Author Archives: Author

Can you stay in your house while the roof is being replaced?

roof replacement being done

How do you install a roof step by step?

There’s no place like home they say, even when you live in fun and sun filled Florida. So, when your home is getting a new roof installation, do you have to leave until its completed? What is a roof installation?  A roof installation is when the existing old roof is removed down to the decking and all new materials are installed. This includes the decking, felt, and roofing materials. 

A roof installation, also referred to as a roof replacement, isn’t a small job, and is typically done by a professional roofing contractor. While a homeowner can make this a DIY project, the labor and the safety factors should be considered. 

Step One:  Removing of all the old shingles and felt paper, including all the nails or staples. 

Step Two: Inspection of the roof deck and rafters, making any repairs or replacement necessary.

Step Three: Preparing the roof surface by installing the drip edge and underlayment.

Step Four: Install new roof materials.

Step Five: Cleanup trash and leftover materials.

Step Six: Perform a final inspection. 

What is the difference between roof installation vs roof replacement? 

A roof installation is the process of installing an a  roof over an existing roof without tearing off the old roofing material. A roof replacement is the process of removing all of the existing old roofing materials, make any repairs needed to the substrate and then install all new roofing materials, including the felt, flashing, materials. 

Do I Need a Roof Installation?

A new roof installation will not only provide better protection of your home and family, it will also update the curb appeal and possibly increase your property value.  If you aren’t sure how to tell if you need a roof installation, here are 10 indications to look for: 

  1. Water Damage and Leaks: A leak in the roof is the biggest indication that a new roof installation is needed. Possibly repairs will work for a small leak, but an inspection by a professional roofing contractor is recommended. What may seem small to the untrained eye could have bigger issues going on. 
  2. Sagging Ceiling: A sagging ceiling is not a character flaw. It is an indication of a moisture building up in the ceiling. If it is soft to the touch, then that sagging ceiling is close to busting open, then you’ll not only need ceiling and a new roof installation, but the damage inside the house will need to be addressed too, or mildew and mold will take over.
  3. Dark Streaks: Dark streaks and stains on the roofing material could be a layer of algae and moss that will come right off with a professional water pressure cleaning. However, if they have been there awhile, the algae has probably started eating away at the shingles, moisture is seeping under the shingles, and it won’t take long for it to reach the ceiling and walls, staining them from the inside and weakening the roofing structure. 
  4. Light Shining Through: From the attic if there is light coming through from outside, you need a new roof installation. This means there are hole where rain an come in, either you have old shingles or your roof is missing shingles. 
  5. Age: A roof that is 20 years old is due for new roof installation. What if you don’t know how old the roof is when you buy the house? Check your neighbors houses out and if several of them have recently had new roof installations, then your home is probably due one too. 
  6. Decaying Shingles: Asphalt or wood shingles will begin to decay and rot when they are at their end-of-life. Shingles will become brittle and crack, curl, or even fall off. When there are several shingles like this, a new roof installation is needed. 
  7. Missing Granules: The weather and old age will cause the granules on roofing shingles to come off. This leaves bare patches on your roof, which is leaving your roof susceptible to leaks. A new roof installation is needed when there are as many or more granules in the gutters than on the roof. 
  8. Broken or Missing Shingles: Broken or missing shingles are places where water can penetrate and get under the rest of the shingles, to the roof deck and underlayment.  Your home is not getting adequate protection at this point and a new roof installation is needed, the sooner the better. 
  9. Hail or Wind  Damage: If there has been a lot of high winds or recent hailstorms, you need to get your roof professional inspected. High winds will loosen shingles and even the smallest hailstones can crack shingles.  Those small cracks will start leaking and then you have bigger problems. Be proactive, most roofing contractors offer free inspections, and get it addressed now before it becomes owner neglect. Once your insurance company determines owner neglect, you’ll lose any chance of your insurance covering the cost of a new roof installation or even repairs. 
  10. Damaged or Missing Flashing: Those thin strips of metal on your roof may not look like they do much, but they are important. When that flashing is loose or missing, it is allowing water to penetrate where walls meet and around the chimney.  You may not need a roof installation, but you definitely need roof repairs. 

How many days does it take to put on a new roof?

The average sized, single story home, a new roof installation can usually be done in one to two days. A home 3,000 square feet or larger could take up to 5 days, especially if it is a multi-story home. The roofing material could make a difference, some materials take longer to install than asphalt shingles.  The weather also is a factor in the time it take for a roof installation, lengthening it as much as 3 weeks. 

What should be included in a roof replacement?

A new roof installation should include the following: 

  1. The roof decking. 
  2. The roof flashing.
  3. The underlayment.
  4. New drip edge.
  5. Ice dam shield.
  6. Asphalt shingles or other roofing material.
  7. New ridge cap. 
  8. New roof vents.

What is the best time of year to put on a new roof?

In Florida, Spring or Winter is the best time for a new roof installation job to be scheduled. The hurricanes and pop up storms are fewer so that minimizes delays. 

shingle roofing

Why get a new roof installation?

We’ve covered the obvious reasons for a new roof installation, like aging roof and storm damage. Another reason would be to boost your home’s value if you’re planning on putting it on the market. If you’re remodeling or updating your home’s exterior, a new roof installation should be considered to go with the new color scheme and design. Call (850) 566-6504 today for new roof installation in Tallahassee, FL.

What does roof hail damage look like?

hail damage to a roof

How can you tell if you have hail damage?

Florida may be the sunshine state, but it also gets its share of bad weather, including hailstorms and high winds. Homeowners here, like in other states that experience hailstorms have hail damage roofs. And that too leads to concerns and confusion about what to do when there is roof damage by hailstorms.  With that, we offer answers and recommendations to the following questions: 

When a hailstorm passes over your home, it typically lasts only a few minutes, it seems to go on forever. Once it passes and the rains have stopped, as a homeowner, you need to go outside and look at your home and property, checking for hail damage. From the cars, plants, and trees to possibly a hail damage roof. 

There is no question that a hailstorm can be destructive, and when it comes to roof hail damage, what to look for is important to know. Are you seeing average wear and tear on your room or is that what roof hail damage looks like? Different roofing materials will react differently from being struck by hailstorms, and here we offer the basics of what to look for in a hail damage roof: 

Asphalt and Composition: 

  • Hail damage roof is random with no obvious pattern.
  • Hailstone hits are usually visible by black marks.
  • An apparent loss of granules that can leave the roof felt exposed.
  • Asphalt or the felt mat has shiny appearance. 
  • Hailstone hits are soft, similar to bruised fruit. 

Wood Shingles 

  • Hail damage roof is random with no obvious pattern.
  • Shingle splits are a brown to orange color.
  • Shingle splits leave sharp corners and edges.
  • Shingle splits have minimum to no edge deterioration.
  • Impact dents or marks are left along the shingle splits.

Thing you may notice on your roof that isn’t hail damage roofing is a brittleness of the shingles.  This comes from everyday UV and weather exposure, not from the hailstorm. You may notice bare spots on the asphalt shingles, which could be hail damage roofing, but granule loss is also from aging, along with blistering, cracking, and flaking. Another character you may notice that isn’t hail damage roofing is algae growth. 

Other things to look for when inspecting your home for hail damage rooftop are: 

  • Dented gutters, downspouts, and gutter screens
  • Siding, window casings and windowsills
  • Outdoor part of air conditioning unit 
  • Deck and any painted surfaces
  • Skylights
  • Pipes and vents

How big must hail be to damage roof?

In 2020, over 4,600 hailstorms passed through the United States according to NOAA.  With the average size of a hail stone around one inch or bigger in diameter, that amount of storms can leave a lot of hail damage roofs in its wake.  How big of a hailstone does it take to leave a hail damage rooftop? 

  • Pea Size  = quarter inch in diameter
  • Marble Size = half inch in diameter
  • Dime or penny size = three-quarter inch in diameter 
  • Nickel size = seven-eighth inch in diameter
  • Quarter size  =one inch in diameter
  • Golf Ball Size  = one and a half inches in diameter
  • Tennis Ball Size = two and a half inches in diameter
  • Baseball Size = two and three-quarters of an inch in diameter
  • Teacup Size  = three inches in diameter
  • Softball Size = four inches in diameter

Should I replace my roof after hail?       

Maybe, maybe not.  If there is severe and significant hail damage roofing, it isn’t necessarily cut and dry. There are complexities and considerations with roof hail damage, when to replace and what it is going to cost you out of pocket after what the insurance company pays, can create a conundrum for a homeowner. Then you add in the push from roofing contractors, legitimate local roofers, and those fly-by-the-night roofing contractors, along with the insurance companies.  

Should I file a claim for hail damage?

Take your own inspection, match it to a professional roofer’s inspection and determine if it is worth calling the insurance company to have them inspect for hail damage roofing.  If your inspection and the roofer’s inspection deem that you do have a hail damage roof, then yes, call your insurance company. 

Take pictures and notes yourself, have the roofing contractor take pictures and provide a written estimate. Share this with the insurance adjuster. If possible, have the roofing contractor present when the adjustor does their inspection. 

hail on a roofing system

Do insurance rates go up for hail damage?

The answer is maybe, maybe not. Homeowner insurance rates do not always increase when hail damage roof claims are file. Obviously, you didn’t cause the weather event that damaged the roof, nor could you prevent it, so it isn’t from homeowner neglect. 

What the insurance company will pay could be affected by the age of your roof though.  If your roof is near its end-of-life, and then hail damage occurs, they may see it as if the roof were replaced sooner, the damage wouldn’t be as severe. Thus, they pay only a fraction of what a  new roof will cost you. Call (850) 566-6504 today for your hail damage needs in Tallahassee, FL.

Is standing seam metal roof worth it?

standing seam roofing on a building

Durable standing seam metal roofing

If the roof on your home is at its end of life or has been damaged to point it needs to be repaired, consider going with a standing seam metal roof this time. Yes, this is the type of roofing you would find on commercial and industrial structures. Or maybe you have images of an old barn you saw on a drive in the country recently. These images are nothing like the standing seam metal roof example for your home though. 

As you begin your journey of considering a standing seam metal roof, you should know some facts about metal roofing for a home. First, you should know there are two kinds of metal roofs which look alike, yet they are different.  There is the R-Panel metal roofing and the standing seam metal roof. What are the differences among standing seam metal roof vs r panel? 

  • The Fasteners: When installed correctly, both R-Panel and Standing seam metal roof panels offer a long lifespan with regular inspections. Standing seam metal roofing panels the fasteners and the R-Panel metal roof panels are exposed. The standing seam metal roof panels have less chance of leaks because of their hidden fasteners. 
  • The Cost: R-Panel metal roof is the less expensive between the two, making it the budget choice. 
  • The Solar Panel Option: the standing seam metal roof panels are designed so that the S-5 clamps attach easily to the seams without drilling. The same is said with the snow retention system on standing seam metal roofing. 
  • The Applications: Both kinds of metal roofing can be used in different ways, each having a certain application that is a better fit than the other. 
  • Notes: The least expensive of the two is the R-Panel, found on agriculture, commercial, and industrial structures. The overall standing seam metal roof quality make it the most preferred for upscale commercial structures and residential areas.

Is 22 gauge steel strong?

Twenty-two gauge is the strongest of metal panels. When it comes to metal roofing, there a several profiles to choose from in the way of thickness and strength. The standard measurements for U.S. manufacturers for thickness, gauge, is 22 is the thickest and 29 is the thinnest. There is a nominal range in decimals making any variance between manufacturers. 

What gauge is standing seam metal roofing?

Standing seam metal roof thickness ranges between 22 gauge, the thickest to 29 gauge, the thinnest and for residential structures, most roofing contractors will use 24 gauge or 26 gauge. The decision is based on the possible weather events the structure needs to endure and the customer’s budget. 

What is the best standing seam metal roof?

Roofing contractors experienced with standing seam metal roofs will recommend the 26 gauge metal. When this material is installed properly, there are many standing seam metal roof advantages including:       

  • Durability: Standing seam metal roofing in a 24 or 26 gauge is unlike other roofing materials. It doesn’t corrode or crack, it can withstand winds of 140 mph, and has a lifespan expectancy of 50 years or longer. A fire resistant material that sheds ice, rain, and snow quick, getting that extra weight off. 
  • Curb Appeal:  Standing seam metal roof has a clean design, making a perfect match for any architectural style.  
  • Minimum Maintenance: Standing seam metal roofs need minimal maintenance. The fasteners are ideal for protection from the elements, making the roof weather-resistant.  Routine inspections are recommended and after significant weather events. 
  • Low Environment Impact: Standing seam metal roofs are designated as a “cool” roof by the EPA (U.S. Department of Environmental Protection Agency) because they are reflective of radiant heat and sunlight. As a cool roof, the energy use is reduced, along with the air pollution and greenhouse gas emissions reduced too.  Because they are made from recycled metal and can be recycled, this metal roofing is an environmentally friendly material. 
  • Cost Effectiveness: The initial cost of a standing seam metal roof is higher than other roofing material choices, but with the long lifespan and minimal maintenance or repairs, the ROI over time is strong.

How long does a standing seam metal roof last?

Like anything for your home, proper installation can make all the difference in longevity. The same is true for standing seam metal roofs too. Proper installation and adequate ventilation in the attic, a minimum of 30 years up to 50 years lifespan should be expected. 

commercial roof with metal

Why is standing seam metal roof so expensive?

Standing seam metal roofing is a premier choice these days for homeowners, even being the most expensive of all metal roof materials. Because it is durable, energy-efficient, and offers a long lifespan, the 30% more that it cost over asphalt shingles is seen to be of value for homeowners. 

In further detailing of standing seam metal roof materials, the G-90 Galvanized Steel, most common for residential use, because of the zinc plating. While aluminum is more expensive, the cost difference is minimal, and more consumers choose the standing seam metal roof material. 

The standing seam metal roof benefits of durability, fire-resistance, corrosion resistant, and overall strength that a professionally installed standing seam metal roof and the longevity of the material all adds up the expense of standing seam metal roof material. Once installed, there will be minimal maintenance or repairs required, meaning this roofing material will pay for itself. Call (850) 566-6504 today for your standing seam metal roof in Tallahassee, FL.

Is it better to repair or replace a roof?

When is roof replacement needed and when will a roof repair suffice? 

Your home is your castle, and your castle needs a new roof. Maybe you can get by with a roof repair for now. With the IRS filing deadline in the not too distant future, your budget is already strained, so can you have a roofing contractor do a repair roof without replacing the roof?  That is what we’re going to focus on in this article today.

So, maybe you have a roof leak. Does that mean roof replacement is the only option? Or can you get away with a roof repair for now, and just stop the leak? If you can just stop the leak with a temporary repair, how do you fix a leaking roof?  If you have an asphalt shingle roof, this is going to be easy, just follow these four steps and just a few basic roof repair materials: 

  • One: To start your roof repair, you need to find the leak by checking the ceiling for water stains, which if you know you have a leak, you probably know right where those stains are located. Now, walking around outside, look at the shingles and if any are cracked, curled, or missing, good chance that is where the leak is located. It is likely NOT where the stained ceiling is inside because the water travels downhill. You should confirm this by checking the attic for damp areas and where you see daylight coming in through the roof. 
  • Two: Fasten any curled shingles by using asphalt roofing cement, applying it under the curled shingle, then cover the edges of the shingle once you have it flattened out, pressing firmly so that it attaches to complete this simple roof repair. 
  • Three: Replace shingles that are damaged or missing with new shingles. When an asphalt shingle is cracked, it can’t be repaired, so replacement is the only option. To do this roof repair , remove any damaged shingles or pieces of shingles and remove any roofing nails that may be under the surrounding shingles, being careful as you do so not to damage the good shingles. Now, slide the new shingles under the shingle above it and beside it, then using 6d galvanized nails, fasten the new shingle at the top, securing the corners, and then cover the nail and any overlapping with the roofing cement. 
  • Four: Repair or replace any flashing that is damaged or missing, this is an important part of roof repair. This is especially important if you don’t see any issues with shingles. The areas where flashing should be located are prone for leaking if the flashing is damaged, loose, or missing. These areas are around the chimney, dormers, and valleys where two roofing angles meet. Using roofing cement in a caulk gun, seal or reseal the flashing so that it is flush with the roof, spreading the cement with a putty knife. 

Can you patch a roof instead of replacing it?

It is going to depend on severe the roof damage.  When you walk around your yard, to you find shingles, or pieces of shingles laying around? Do the gutters and downspouts have asphalt granules in them? Are you experiencing any leaks inside your house or have you noticed any water stains on the ceiling? The answer to these things can tell you what solution is the best, roof repair or roof replacement. 

Three basic questions will tell you whether you should go with a replacement instead of repairing the existing roof: 

  • What is the age of the current roof? If it has reached the 15 year mark or older, replacement is the better option. 
  • Are you staying in your home for another 15 to 20 years or longer? A new roof would be the better option because it is going to need it sooner or later. 
  • What does your budget have roof for? This is usually the decision maker. If you can afford a new roof and have answered all the other questions above, leaning toward a new roof, then get the new roof. 

Can I replace my roof in sections?

If there are only a few shingles missing here and there, replacing just those shingles is usually sufficient. However, if it  after a storm that you notice these missing shingles, you should have a professional roofing contractor inspect your roof. There could be damage to the decking or underlayment that needs more than replacing a few shingles. 

If half of your roof is damaged, or more, then the question of roof repair vs roof replacement is answered: roof replacement!  With that type of damage, reroofing could leave you a lot of problems going forward. You could also have trouble getting the new shingles to match the existing shingles. 

shingles on a roof

Will insurance cover leaking roof?

Is roof repair insurance covered? Maybe, maybe not, it all depends on your insurance company, your specific insurance policy, and the roofing issue.  If the roof is beyond its life expectancy and begins leaking, your homeowner’s insurance is going to cover repairs or replacement. If your roof shows signs of owner neglect, it won’t be covered by insurance.  Review your policy and follow up with your agent if you have any concerns or questions before you have the need to file a claim.

Yes, your home is your castle, and your castle needs upkeep.  Repair or replace the roof is minor when you compare those costs with the investment you’re making with buying a home. This is your future, not just the here and now. Need help with your roof repair or replacement in Tallahassee, FL? Call (850) 566-6504 today.

How do you fix a sagging roof on a mobile home?

shingled mobile home roofs

Can you put shingles on a mobile home?

We’ve talked about roofing here many times, commercial and residential. None of those conversations have said much about a mobile home roof, so, we are making that our topic today. Why? Because the structure of a mobile home roof is different than a site built home and the elements affect them differently. 

When a mobile home roof is damaged by weather, or a mobile home roof is leaking because is starting to age, mobile home roof repair is more like repairing a commercial flat roof than a site built home with a standard pitched roof. There are different considerations when it comes to a mobile home roofing fixes, and not every roofing contractor is experienced and prepared for this task. 

Yes, with some considerations and forethought. There are three options for a mobile home roof material:

  • Aluminum
  • Asphalt shingles
  • TPO 

TPO is the most common used material because of its flexibility and installs easily. The white surface offer optimal energy efficiency, and it is inexpensive. However, asphalt shingles are used for a mobile home roof, but only one layer. A mobile home roof doesn’t have the structure stamina as a site built home to hold up the weight of multiple layers of asphalt shingles. 

How often should you coat a mobile home roof?

Mobile home roof coating, like commercial roof coating, is a rubber like material that is rolled on and seals any cracks that may be present. Expert roofing contractors that install and service mobile home roofs recommend re-coating every two to three years and inspect the roof after a storm for possible touch-ups. Bad weather or not, a mobile home roof should be inspected yearly. 

Before applying a mobile roof coating, the following is recommended: 

  • The Weather:  There should not be any rain forecasted for  a couple of days and no colder than 50 degrees with a low humidity to get the best adhesion and results. 
  • Inspection: Even if your mobile home roof isn’t leaking,  there could still be cracks and damages. Do a thorough inspection before applying the roof coating.
  • Cleaning: After doing a thorough inspection, clean the roof of any flaking coating, especially around the edges and vents.  The new roof coating won’t adhere well over old coating that is flaking. 
  • Make Repairs: Using a roof patching cement, make repairs as needed.
  • Pressure Wash: Pressure wash your mobile home roof to remove any dirt and grime then allow it to dry completely  before beginning.
  • Applying the Coating: Do not overlook the seams with the repair process or coating. Each roll of the coating should have a one inch overlap with the previous roll. Make sure to coat the J-Rails and flashings. Using a paint roller, you’ll need one gallon for every 100 square foot for proper thickness.  

Do mobile homes need roof vents?

HUD is responsible for the Manufactured Housing Construction and Safety Standards which determines the structure and safety of mobile home manufacturing. The requirements according to MHCSS states that all double wide mobile homes shall have shingled roofing, and a single-wide mobile home roof shall be ventilated.  These requirements can vary from state to state to meet the climate and weather conditions of the area. 

What if your mobile home roof is the TPO coated low-sloped style roof, can you have asphalt shingles installed?  Yes, but only after some alterations have been done, and here is why:

Every inch of a mobile home is designed and build specifically to the layout, beginning with the chassis. The chassis is balanced with a curve to properly distribute the weight. Where a site-built home has pitched roof trusses, a mobile home roof has lateral roof trusses that go from side to side, resting on the sidewalls.

This doesn’t mean you can’t upgrade your mobile home roof to asphalt. Because asphalt shingles are heavy, a mobile home’s structural integrity would need to be increased if possible. A roofing professional that works on mobile home roofing can inspect yours and advise if this is a feasible task.  

Can you put regular gutters on a mobile home?

No, to install a gutter system on a mobile home roof, there are gutters specially designed and manufactured for mobile homes. Installing anything different could damage the mobile home roof and siding.

mobile home with a porch roof being installed

Can you walk on a mobile home roof?

Mobile home manufacturers say it is safe to walk on a mobile home roof, but insurance experts recommend taking precautions, like inspecting the roof and trusses first.  You want the roof to be in sound condition before  walking on mobile home roof, or any roof.      

A mobile home roof will provide comfort and safety as any site-built home’s roof. They need as much attention to inspection and cleaning as site-built homes. The mobile home roof is an important component and should be kept maintained and repaired to get the full expected 50 year lifespan. Call (850) 566-6504 today.

Why is hail damage bad for a roof?

hail tile with hail on it

Does Hail always damage a roof?

We can all agree that the year 2020 has blew everyone’s expectations and imagination, and we’re not talking politics. We’re talking about everyday life, from going to school or work, running out of toilet paper, and the weather! Oh yeah, the weather, there are part of the country not familiar with hailstorms, yet they are facing hail damage roof repairs right along with the part of the country where that is part of life. 

Roof damage by hail is one of those things you think happens to other people, especially if you don’t live anywhere that hailstorms are common. Regardless where you live, hail damage on roof is not something to ignore or put off taking care of it. It may not look like much from the ground, or even from a ladder for the untrained eye, but hail damage can be a big issue. Hail damage roof repairs is one of the biggest businesses in this country. 

Not necessarily, but there is always a risk when there has been a hailstorm, which makes it worth your time to inspect your roof.  Unlike snow, hail is chunks of ice attacking your home with various sizes and  velocity. Hail damage roof repair jobs can be a minor job or a total roof replacement. 

Even the smallest hail stone can cause damage to your roof depending on the condition of your roof, the size and speed of the hailstones, and how it impacted the roof. A metal roof is the most durable roofing material and asphalt shingles are the most common hail damage roof repair jobs.  What kind of damage can hailstones do? 

  • Dime-Sized Hailstones: Can tear an old, worn asphalt shingle and the higher the velocity, damage to new asphalt shingles is possible. 
  • Quarter-Sized Hailstones: Hailstones this size can wear away roof shingles, cause faster erosion, and tear asphalt shingles while slate shingles can break.  
  • Half-Dollar Size Hailstones: This size hailstone is  a significant risk to any type of roofing material, including denting metal roofing.

How do I know if my roof has hail damage? And Can you see hail damage on a wet roof?

After a hailstorm, regardless the hailstone size, you could have possible hail damage to roof shingles and you need to know as soon as possible.  This may mean checking the roof while it is still wet, which on an asphalt roof isn’t any more dangerous than being on it while it dry. You don’t want to walk any roof that is covered with algae or moss, it is slick whether it is wet or not. If you aren’t comfortable walking on your roof, call a professional roofing contractor. Most roofing companies offer free inspection for hail damage roof repair possibilities. 

With the wide choice in roofing materials used today, the hail damage roof repair needs may look different from material to material. Whether your roof is an  asphalt shingled roof, ceramic or slate roof, or metal, here are some things to check for hail damage.

  • Ground Check: After a hail or windstorm, walk around the exterior of your home for telltale signs like fence or gutter damage, storage shed roof damaged, or pieces of your home’s roofing materials. If there are fragments of the roofing material on the ground, there are areas of the roof not covered.  The sooner you call a professional roofing company for hail damage roof repair, the better. 
  • Checking the Metal Components: Every roof, no matter what type of material you use, has metal components, like the flashing and vents. If these are damaged, loose, or missing after a hail or windstorm, call a professional roofing company and request an inspection for hail damage roof repair. 

Other Checks: 

  1. Check the downspouts and gutters for granules collected. This warrants having a professional contractor do a hail damage roof repair inspection because this means there are granules missing on the roof.  
  2. The contractor should check the shingles for oval or round dents left by hailstones. 
  3. Ask the contractor to mark the damages and take pictures so that you can file a hail damage roof repair insurance claim. 
  4. Ceramic or slate shingles can be broken, chipped, cracked, punctured by hailstones, visible by clean, sharp-edges of holes. 
  5. Metal roofing look for dents, scratches, scraps, and loose or missing screws. 
hail indicated from chalk circles

Should I replace my roof after hail?

Maybe and maybe not. This question is always at the forefront for every roofing contractor and insurance company when it comes to hail damage and roof replacement, and there isn’t a yes or no answer. It can depend and that is why a professional inspection for hail damage roof repair is recommended. 

There could be damage that the untrained eye doesn’t see, especially if you’re looking from the ground. When hail damage isn’t addressed, the decking and underlayment will begin to rot. Bacteria, mold, and other water damage starts, spreading over the entire roof, into the attic, and into your home. If you have any concerns or suspicion that your roof may have hail damage, roof repair needs to be done sooner than later. 

Top It Off With Metal Roofing? 

If metal is the most durable roofing material available, can metal roofs be damaged by hail? Yes, but not as easily as asphalt, cedar, ceramic, slate, or other materials.  Metal roofing has taken off in popularity in recent years as asphalt roofing has increased to almost equal installation cost and supersede in repairs and replacement. Homeowners are looking for more environmentally friendly materials and metal is not only more durable, but it is recyclable too. Just as attractive, metal roofing isn’t just for the old barn out back anymore. Want to get started on your hail repair in Tallahassee, FL? Call (850) 566-6504 today!

How Do You Repair an Emergency Roof?

How Do You Repair an Emergency Roof?

Are you wondering what is entailed when it comes to emergency roof repair? If so, please review the following bullet-pointed list to discover more.

  • The first thing that you do when you notice that you are in need of emergency roof repairs is to call a local, reputable roofing company. You can review the available options through a simple internet search. Please be sure to select a roofing company that is verified by Google and has the appropriate credentials.
  • The next thing that you can do is investigate the area. Using the appropriate safety equipment such as gloves, a hard hat, and using the best safety procedures, locate the areas where the rain is coming in.
  • You can then use a tarp and roofing nails to cover the area until a reliable and efficient roofing company can come in and repair the damage.
emergency roof repair

How Do You Temporarily Fix a Leaky Roof?

According to leading sources on the internet, there are ways for individuals to temporarily fix a leaky roof. As previously mentioned, it is always best to consult a professional roofing company in such circumstances. While you await their presence, there are steps that you can take to minimize the damage. A tarp applied over the area will decrease the amount of water coming in dramatically. Apparently, mastic or roofing cement can also be applied over the leak to temporarily stop the water from coming in. The mastic will need to applied to any holes and leaks that are present to make sure that it seals precisely. In addition, it will be important to make sure to spread the mastic cement a couple of inches around eh area to prevent any further leaks from occurring in the area. A professional roofer is the best to apply the mastic cement.

Can a Roof Be Fixed from the Inside?

Are you wondering whether or not it is possible to fix a leak from the inside of your home? You may be surprised at the answer. This is because fixing a leak from inside your home is practically impossible. If you were to try to fix a leak in your home, you would only be diverting water to another part of the roof where it will eventually find its way in or cause sheathing rot and increased damage. It’s important to remember that once water finds its way under your shingles and the underlayment, your shingles will need to be replaced. In bad enough circumstances, your entire roof may need to be replaced. This is a momentous decision, and should only be determined by an established, reputable, and insured roofing company.

How Do I Stop My Roof from Leaking Water?

If your roof is leaking, it is of utmost importance that you repair your roof as soon as possible. If your roof is leaking from the ceiling, it may already be too late. The first thing that you will need to do is to contain the leak. For instance, if you notice that water is pooling on the inside of your ceiling, and it has caused a pouch to form, you will need to puncture the pouch and hold a bucket or pail underneath to catch the water. Puncturing a hole in the ceiling and allowing the water to go into the pail will relieve pressure on the rest of your ceiling. You will need to empty the pail periodically as you await the presence of your roofing company to fix the leak.

What to Do If Roof is Leaking During a Storm?

If your roof is leaking during a storm, it will be important to act swiftly and decisively. You will need to minimize the water damage as much as possible. As mentioned previously, place a pail underneath where the leak is occurring and make sure that the water damage is as contained as possible in one location. You will need to contact both a reputable roofing company in addition to your insurance provider. If the damage to your roof has been caused by roof storm damage, there is an opportunity for your insurance provider to pay for the associated damage.

How to Make Emergency Roof Repair

If you need to make emergency roof repair, the first step will be to call a reputable roofing company. While you wait, try to mitigate the damage as swiftly and safely as possible. It is important to refrain from getting on the roof because it is dangerous. 

Emergency Roof Repair

Emergency roof repair is offered by many roofing companies. However, it is important to be discerning with regard to your selection of a competent roofing company. For instance, it is important to only select a roofing company versus a simple handyman. A roofing company will have the best tools and materials for the job.

Emergency Roof Repair Near Me

Your location is important. If you desire emergency roof repair from a company that is close to you, you can use Google maps to locate a number of companies that are near your location.

emergency roof repair

Emergency Roof Leak Repair

At the end of the day, it is important to invest in your biggest investment: your home. Please be sure to select a great roofing company for your roof system.

For the best emergency roof repair in Tallahassee, FL, rely on us to do the job right. Please reach out to a member of our team at (850) 566-6504 today.

Is Standing Seam Metal Roofing Right For Your Home?

standing seam metal roofing

What is standing seam metal roofing?

Standing seam metal roofing is made with a series of vertical metal panels that interlock, and those interlocking components are the seams that are fit together in different ways. The significant difference between standing seam metal roofing and corrugated roofs is the seams. With a standing seam metal roofing, the fasteners are hidden, and with corrugated metal, the fasteners are exposed.  This sleek appearance that standing seam metal roofing has is what has drawn the attention of homeowners everywhere. Standing seam metal roof materials are usually made from a thicker grade, 26 gauge minimum, a G-90 galvanized or galvalume steel for the panels. As opposed to a corrugated steel roof is made of a 29 gauge steel. 

Can you put a standing seam metal roof over shingles?

Budget is always a concern for contractors and homeowners, and if metal roofing is the plan, standing seam metal roof installation is usually their choice.  Unlike aluminum and steel shingles, standing seam metal roofing panels should not be installed on a roof with existing asphalt shingles. Once the coating wears off of standing seam metal roof materials, it will ultimately corrode and rust.

The stone granules of asphalt shingles contract will be rubbed from the contracting and expanding of the standing seam metal roofing, wear the coating off and start rusting sooner than it usually would. These issues can be avoided by tearing off the old asphalt shingles and remove all nails that are protruding from the decking before you proceed with the standing seam metal roofing installation. 

Any experienced, honest roofing contractor that installs standing seam metal roofing will know this and will advise any customer while providing their quote. The qualified roofing contractor will discuss options and requirements with the homeowner and answer any questions and offer recommendations and suggestions, including choosing the right color for your home’s architectural style. 

Green metal roof

Is a standing seam metal roof worth the cost?

That is a common question and understandable. Standing seam metal roofing is expensive; any roofing material is not something a homeowner should be frivolous about choosing. Roofing is an essential factor for your home, and you’re going to be looking at it for the next 20 years or longer.  

Generally speaking, standing seam metal roofing installation is going to cost you more than an asphalt shingle installation or a corrugated metal roofing installation. However, a standing seam metal roofing installation will have a longer lifespan than an asphalt shingle roof. 

When it comes to standing seam metal roofing, pros and cons should be considered, and it is the following benefits that decide for many homeowners to take that extra expense: 

  • A Durable Material: Standing seam metal roofing is made of a durable material, which makes one of the most significant differences from asphalt shingles. As we mentioned earlier, standing seam metal roofing is made of more substantial and thicker material than corrugated roofing, which is commonly found on barns and sheds. A standing seam metal roofing that has been installed correctly can stand up to winds of 110mph. 
  •  Energy Efficient: Asphalt shingles are available in any colors today, but most are still a dark color that absorbs heat from the sun. The metal panels of a standing seam metal roofing installation come in more colors today, too, including lighter colors that reflect the sun’s UV rays, providing an extra layer of insulation. 
  • Longer Life Span: A standing seam metal roofing can last fifty years when installed and maintained correctly. Standing seam metal roofing maintenance is vital to get that fifty years (or longer) lifespan. 
  • Maintenance and upkeep: The durability of standing seam metal roofing is an essential factor when compared to asphalt roofing, which needs inspection every three years.  Standing seam metal roofing that has been installed correctly can have an inspection every five years unless there is extreme weather, or you notice a leak. 
  • Installation varies: Different types of standing seam metal roofing have different ways they fit together. While some interlock easily, others need special tools to crimp the seams. A standing seam metal roofing has an average two-day installation on average, depending on the size and dimensions of the house.

Okay, so standing seam metal roofing is fantastic, but what are the disadvantages of a metal roof? There are a few, and each homeowner needs to weigh out the advantages and disadvantages to determine if a standing seam metal roofing is right for them.  Those disadvantages are: 

  • Affordability. Metal roofs are more expensive than asphalt roofing, as much as two to three times more. A metal roof as a long lifespan, but if you’re only going to be in the house another ten years, standing seam metal roofing may not be the choice for you. 
  • Noisy. A standing seam metal roofing can be noisy during hailstorms and heavy. Having an extra layer of insulation during install can help minimize that but will add to the cost of the install.
  • Contractions and expansion. A standing seam metal roofing will contract and expand with the temperature. When they are installed correctly, they fasteners can come loose, and the roof can develop a leak. The fasteners should be installed so that the metal can breathe and eliminate this problem. An experienced roofing contractor will know this and include it in their quote for you.  

The color match is inconsistent. It can be challenging to get the exact same color if any repairs are needed due to exposure to the sun that will change the color over time. Call (850) 566-6504 today for standing seam metal roofing in Tallahassee, FL.

What to do if your roof is leaking?

cleaning up after a roof leak

Maintaining Your Roof

Florida is The Sunshine State!  People come here from all over to enjoy the beaches, the ocean, and all that encompasses. There are many beautiful and wonderful things about this state, but the weather isn’t always sunshine. There are hurricanes and rains, just like anywhere else, and when those happen, homeowners have the same concerns and fears of a leaking roof

Who fixes leaking roofs?

When a homeowner in Florida has a leaking roof, companies come out of nowhere, offering their services of roofing repair for leaks, just like any other state. There may be more here than other states!  Does that mean you take the first person who leaves a business card or flyer on your door? Absolutely not!

If you have a leaking roof, you need to call an experienced, legitimate roofing company. A handyman or a general contractor may know roofing and leak repair options, but they most likely do not the nitty-gritty details about a leaking roof. They probably don’t know the details to roofing structure and the many components that go into making a roof safe, stable, and leakproof. 

First, you’ll want to file a leak roofing insurance claim with your homeowner’s insurance. They will send an adjuster to inspect the damage and determine what caused the leak. They’ll decide your leaking roof is from old damage or recent damage, and if old damage, chances are they will deny your claim.

So, the first thing you’ll want to find out is “Why is my roof leaking?”, because if the insurance company denied your claim, it still needs to be fixed.  Knowing the where and why is important in getting if fixed, and for that, you need the services of a professional roofing contractor.

Your home in an important investment, probably the biggest one you have, and you want to take care of it so it can take care of you and your family. So, how did that leaking roof happen? Well, first, a leaking roof doesn’t just happen.  It is either from age, damage, or poor maintenance.  Here we have listed 10 probable causes of a leaking roof: 

1. Cracking or Missing Flashing

Flashing are those thin metal strips that are found under the shingles and at anywhere you roof joins other roof angles or protrusions. The purpose of flashing it to create a water-resistant barrier, and if exposed, it could result in a leaking roof. 

2. Broken Shingles

You don’t have to get on top of the roof to see these, step out on the curb or sidewalk and look at your roof. If you see any shingles missing or laying in a different direction. You may even find some in your yard after a heavy rain and windstorm. Where shingles are broken or missing, leaking roofs happen. 

3. Unsealed Valleys

Earlier we mentioned where your roof joins other roof angles or protrusions, where the flashing is often installed under the shingles. Sometime this is referred to as a valley and these areas are not correctly sealed, rainwater will get under the shingles and a leaking roof is the result. 

4. Cracked or Missing Booting

There are protrusions in your roofing, typically plumbing pipes and exhaust vents. When metal flashing strips are not a good fit, a rubber boot is used by the roofing contractor. With weather exposure and aging, they become cracked and may even fall off. This exposes your roof and a leaking roof is possible. 

5. Ice Dam Buildup

You won’t experience this leaking roof issue until there has been an ice or snowstorm. When the ice and snow melt, they run down the roof to the eaves. Because it exposes the eaves to the wind, that melted ice and snow freezes there.   

6. Skylights Old or Improperly Installed

You shouldn’t have any problem locating a leaking roof at the skylight. If they skylights are 10 years or older, they’re due to be replaced. They can be damaged by the constant sun UV rays and weather, drying out the sealant, and creating a leaking roof. 

7. Clogged Gutters

If you’re noticing leaves, limbs or other debris hanging out of your gutters and you have a leaking roof, look no further!  When gutters and downspouts are clogged, the water has nowhere to go except over the gutters or back up under the shingles. 

8. Chimney Cracked

Examine your chimney and if the mortar or mud cap is looking worn, there may be places that is causing your leaking roof. 

9. Condensation In The Attic

If you notice condensation in the attic, dampness on the insulation, mildew, or mold, you have a leaking roof into the attic. This could be harder to locate and require the services of a professional roofing contractor. 

10. Neglect

Yes, homeowner neglect. As a homeowner, you should take a visual check around your home to see if there are any issues that need to be addressed. Like shingles laying in the yard, or tree limbs on the roof that can cause a leaking roof. Your roof needs to be professionally washed at least once a year to keep the algae and other substances that eat the shingles. 

result of a roofing leak

Is a leaky roof dangerous?

It can be! A leaking roof is more than a structural problem. There are several health and safety issues to be concerned about when you discover a leaking roof.

  • Damage attic and ceiling: The initial dangers of a leaking roof are the attic being damaged and anything you have stored in the attic. If you don’t have an attic, then that damage will be directly to the ceiling.  
  • Interior mildew and mold: A leaking roof has long-term consequences that can get serious fast with mildew and mold growth. Mold gets into the structure, the HVAC system, and then is spread throughout the entire house through the vents. The health issues for your family can range from asthma, congestion, inflammation, and more.
  • Fire hazard: We all know that fire and water don’t mix, and when you have a leaking roof, you have danger of water reaching any electrical wiring that could have exposed wires or a short.

Other dangers you could experience from a leaking roof would be puddled water on the floors, right for somebody to slip and fall. Higher utility bills with energy wasted cooling and heating the attic instead of the house.  Don’t forget the structure is compromised too! 

Can a leaking roof collapse?

Yes, if left unaddressed and unrepaired, it can weaken the supporting rafters and decking, collapse right in the middle of your bedroom, kitchen, living room, etc. Small leaks turn into bigger ones.  

Can you repair a leaking roof from the inside?

Temporarily, yes. You’ll first need to find where the leaking roof is coming from and that will be your biggest challenge. If you notice the ceiling bulging, place towels and a bucket under then punch a hole in it so the water can drain out. 

Next, go in the attic and find the leaking roof, being careful not to walk where the attic flooring isn’t supported. Use a flashlight to find the areas and follow the water trail. There is the leaking roof! Make a temporary patch a durable material, sheet of plywood, anything, even spare shingles and attach with roofing tar and nails. 

Now call a roofing contractor if you haven’t already! 

Final Thoughts 

Your home is your place of refuge and safety.  Taking care of the roof is part of homeownership that hopefully will keep you from having to call a professional roofing contractor.  Never let a small leak go without paying attention and addressing the matter.

Are Asphalt Shingles Good?

oofing contractor. roofing construction and building new house with modular chimney, skylights, attic  exterior. roofers install, repair asphalt shingles or bitumen tiles on the rooftop outdoor

Learn More About Asphalt Shingles

Your roof is an important final cover that provides protection and a chic final look to your property. There are many materials that can be used to cover a property from metal to clay yet perhaps the most known got-to materials for most US neighborhoods are with asphalt shingles. Asphalt shingles are a reliable tried and true source of roofing materials that provide no-fuss basic protection with affordable price points and easy maintenance. There are even premium options that have been developed over the years for more range in size, texture, and color so speak to your local roofing company today to learn more. Until then, here is some general background information concerning asphalt shingles that may prove useful to you.

How long do asphalt shingles last?

Asphalt shingles are known to last from 15-25 years depending on proper initial installations and weather patterns. The materials that are used also alter the life span of the roof as according to the NAHB fiber cement shingles are seen to last about 25 years and asphalt/composition shingles about 20.

Are Fiberglass shingles better than asphalt?

FIberglass can be used as the base materials for asphalt shingles yet typically asphalt shingles use a paper base. Fiberglass is the better option to use for many as they hold more water and fire resistance and will work better in hotter climates.

What is the difference between architectural shingles and asphalt shingles?

Asphalt shingles typically come in a three-tab variety which has the appearance of three shingles side by side when really there is one long strip of materials and tabs separated 12 inches wide. These shingles typically have a layer of materials with a fiberglass base. With architectural shingles, you’ll have more layers of material with a wider range of options in size, color, and shape.

Are there different grades of asphalt shingles?

There are indeed different grades of asphalt shingles with three tabs shingles being the standard option and architectural shingles being the premium option. There are also other shingles that have been made to tackle inclement weather as seen with impact-resistant shingles that protect against hail and high winds. 

What are the longest lasting roof shingles?

The longest-lasting roofing shingles are laminated shingles that typically come with a lifetime warranty. Ther are two categories that it falls under such as dimensional shingles with the standard architectural shingle variety, and luxury shingles which can mimic the appearance of slate or wood shakes.

Side Angle of Roof line of a house with gabels

What is the best asphalt shingle?

  • Atlas. Pinnacle Pristine.
  • GAF-Elk. Royal Sovereign.
  • CertainTeed. XT 25.
  • Atlas. StormMaster Slate.
  • Tamko. Heritage.
  • Owens Corning. Oakridge.
  • Owens Corning. Duration.
  • Owens Corning. Berkshire Collection.

Which is better light or dark roof shingles?

Essentially the idea of using lighter colored materials is that they will be able to deflect heat and keep temperatures of the overall building lower. This can help with maintaining proper building temperatures and therefore help HVAC systems maintain their energy. However, naturally reflective roofing materials or adding reflective coatings are necessary to achieve this and those will be found with more premium roofing materials. On the flip side, darker roofing materials will absorb heat which can instead be great for colder climates. They will also help with snow and ice melting off of roofs faster.

How hot does it need to be for shingles to seal?

In order for asphalt shingles to seal well, it needs to be around 70℉ of ambient temperature. That’s why roofing projects with certain materials are usually done in warmer temperatures and are not done as much in the wintertime.

Is it better to remove old shingles?

If there are any areas of the roof that have been damaged from punctures of water infiltration it will be better to remove older materials and start with fresh ones. Additionally, if there are any loose shingles remove those as well before applying a new layer of 30-pound roofing felt.

Is it OK to shingle over old shingles?

It is permissible by many municipalities to have two layers of roofing and with some, you may even have three layers. However, adding new roofing materials over old ones is typically only possible with asphalt shingles as the base materials.

Reach Out to Your Local Roofer Regarding Asphalt Shingles

If you’re interested in asphalt shingles make sure to get into contact with your local roofing company for more assistance. A professional roofer will be able to inspect your roof and determine which type of roofing material would match the best with your property’s specifications as well as climate. Asphalt shingles are a great choice to incorporate into your roofing system for standard protection and a clean, attractive roof. Get in touch with your roofer today for more information.

If you’re interested in asphalt shingles in Tallahassee, FL call (850) 566-6504 with Folsom Roofing!